Start from the mechanism
A strong RFQ makes technical risk visible before price is discussed.
Suppliers need enough information to distinguish a prototype from a repeat-production project and to identify tooling, resin, inspection and secondary-operation requirements.
Good quotes are comparable because the suppliers are pricing the same technical scope. Include whether tooling belongs in the quote, who owns the CAD revision, how many first samples are needed and which inspection report is expected. If an alternative resin is allowed, ask the supplier to identify it explicitly rather than silently substituting. Open assumptions should appear in the quotation, not remain in email history.
Inputs to freeze before quotation
Send 2D/3D data, resin requirement or environment, quantities, colour/finish, inserts, critical dimensions, samples and target timeline.
Cantumkan masukan-masukan ini pada gambar, spesifikasi, atau lampiran RFQ yang terkontrol jika memungkinkan. Dengan memisahkannya dari percakapan pesan informal, perbandingan pemasok dan revisi selanjutnya akan lebih mudah dikelola.
What can invalidate the assumption
An image plus a target price leaves too many technical assumptions and often produces quotes that are not comparable.
Verification strategy
Issue the RFQ with a revision-controlled drawing and ask suppliers to list deviations or open assumptions.
For Preparing an Injection Molded Parts RFQ, close the DFM loop by updating the controlled CAD/drawing and sample plan. A recommendation that never reaches the released revision cannot be inspected consistently in production.
Procurement checklist
Before requesting a price for preparing an injection molded parts rfq, identify the current drawing revision, production quantity, material constraint and the feature that most strongly affects function. Ask the supplier to flag any deviation from those inputs in the quotation so technical alternatives stay visible.
Tinjauan desain praktis untuk keputusan ini
An RFQ should remove the assumptions that cause quotation revisions. Send a controlled drawing, CAD, material or service requirements, mating interface, CTQs, quantity and the functional acceptance method. Identify whether the project is a new design, replacement or cost-down because the validation path differs.
Catat asumsi pada gambar atau RFQ agar pemasok dapat mengkonfirmasinya sebelum memberikan penawaran. Jika suatu nilai tidak diketahui, identifikasikan sebagai item rekayasa terbuka daripada menyalin nomor katalog umum yang mungkin tidak sesuai dengan rakitan tersebut.
Lembar kerja verifikasi
- Drawing revision + CAD
- Mating component data
- Material / environment
- CTQs and inspection method
- Prototype / batch / annual quantity
- Functional sample acceptance
Gunakan sampel pertama untuk melengkapi poin-poin ini dengan bukti dimensi dan pemeriksaan fungsional yang relevan. Setiap penyimpangan yang diterima harus dicatat dalam revisi terkontrol sebelum produksi ulang.
