描述
POM / acetal gear family
POM/acetal is frequently evaluated for plastic gearing because of its dimensional behavior and low-friction characteristics, but grade, geometry, mating material and temperature still determine suitability.
POM can be sensitive to aggressive press fits and to thermal growth relative to a metal shaft. Where the bore is critical, state the shaft material, fit intent and assembly temperature. For dry-running pairs, the mating flank material and finish should be part of wear testing.
How to read the product photograph
The main image is a photograph of a physical sample or representative component, not a dimensional definition. Resin colour, tooth count, bore or hub features, rack length, inserts and other details can change with the released drawing. Use the photograph to understand the product family; use the controlled drawing, mating interface and agreed inspection plan to manufacture and approve the part.
Geometry and interface inputs for POM / Acetal Gears
- Exact POM grade if specified
- Gear geometry and bore/hub interface
- Mating gear material
- Temperature, chemicals and lubrication
- Molding or machining quantity/route
几何参考： Spur, bevel and other supported functional gear forms
选择生产路线
POM gears may be molded or machined. Molded geometry should account for shrinkage and hub/wall transitions, while machined gears depend on available stock form and stable fixturing.
打包流程参考： Injection molding or machining according to confirmed product configuration
材料方向： POM / polyacetal / acetal
应用特定设计评审
Press fits, elevated temperature or a mismatched wear pair can create performance issues even when the base resin is appropriate.
典型用途： Automation, appliances, office equipment and compact transmissions. The final material and tolerance plan should be checked against the load path, mating components and environment in that assembly.
首次抽样和检验重点
Define gear geometry, bore/runout and any functional roll or mesh checks. Compare parts in a controlled temperature/conditioning state when dimensions are critical.
报价决定： Use the real operating temperature, moisture, mating material, torque, speed, geometry and tolerance needs to decide whether POM is suitable.
What to send for a POM / Acetal Gears quotation
请提供最新的图纸或CAD模型，并注明生产数量以及影响配合、磨损或尺寸稳定性的应用条件。如果该零件用于替换现有组件，请明确哪些特征必须保持互换性，以及新零件旨在解决的任何已知现场问题。
- 可控的图纸修改和3D模型（如有）
- 配合部件或传动几何
- 物料需求或服务环境
- 样品数量、生产批次和预计年需求
- 关键尺寸和功能验收方法
制造前需确定工程规范
生产图纸应将应用转化为可衡量的输入。下表列出了该产品系列的最低审核要求；如有任何装配相关的基准、表面处理或验收要求会改变功能，请添加这些要求。
| 定义 | 供应商需要什么 |
|---|---|
| Exact POM grade if fixed | 请在最新图纸上标明数值、公差或功能要求。 |
| Gear tooth geometry | 请在最新图纸上标明数值、公差或功能要求。 |
| Mating gear / center distance | 请在最新图纸上标明数值、公差或功能要求。 |
| Bore / hub / shaft fit | 请在最新图纸上标明数值、公差或功能要求。 |
| Torque, speed and duty | 请在最新图纸上标明数值、公差或功能要求。 |
| Temperature and fluid exposure | 请在最新图纸上标明数值、公差或功能要求。 |
| Lubrication / wear pair | 请在最新图纸上标明数值、公差或功能要求。 |
| Dimensional-stability target | 请在最新图纸上标明数值、公差或功能要求。 |
设计评审期间需要预防的失效模式
Common risks for this geometry include grade substitution without rechecking shrinkage or dimensions; service moisture/temperature outside the approval condition; wear-pair assumptions based on one material only. These are best addressed before the first sample by reviewing the complete mating interface, not by tightening every drawing tolerance.
应有选择地使用公差。决定齿轮啮合、链条啮合、轴配合或装配基准的尺寸需要明确的测量方法；非关键的模塑表面通常可以使用更实用的通用公差。
首件验收和生产验收
抽样前，应先确定检验条件、基准和测量方法。首件检验报告应涵盖图纸的关键质量特性（CTQ），并结合实际装配或代表性夹具进行功能性检查。对于齿轮和链轮，检查内容可包括啮合或链条啮合、跳动和孔径关系；对于定制模制零件，检查内容可包括配合、紧固和载荷特征。
生产控制应遵循相同的关键质量特性（CTQ），而不是用一长串易于测量的外观尺寸清单来取代它们。如果孔、齿、嵌件或安装面需要进行二次加工，则应明确指出哪道工序确立了最终基准。
POM / Acetal Gears FAQ
我应该提供哪些资料进行报价？
请发送最新的二维图纸，如有三维模型，也请一并发送。请提供配合零件信息、订购数量、使用条件以及控制配合或运动的特征。对于几何形状不确定的旧零件，提供样品会很有帮助。
材料应该如何指定？
对于聚甲醛（POM）或尼龙项目，仅凭材料系列信息是不够的。在必须的情况下，务必确认实际等级，并说明湿度、温度、润滑剂和配合材料等条件，以便评估尺寸和磨损性能。
第一个样品如何获得批准？
在生产样品之前，应明确关键质量特性（CTQ）、检验状态和功能测试。审批流程应确认可测量的几何形状以及零件在其预期接口中的性能。
Engineering decision brief for POM / Acetal Gears
Define the geometry
Spur, bevel and other supported functional gear forms The quotation should use the drawing revision and mating interface as the controlling definition rather than an image alone.
Choose material by duty
POM / polyacetal / acetal Material selection should be checked against load, speed, temperature, moisture or chemicals, lubrication and the required dimensional condition.
Freeze the production route
Injection molding or machining according to confirmed product configuration The route should be fixed only after quantity, tolerances, surface requirements and change risk are understood.
Agree acceptance
Use the real operating temperature, moisture, mating material, torque, speed, geometry and tolerance needs to decide whether POM is suitable. First-article checks should therefore focus on the dimensions and functional interfaces that control the assembly.
Typical application context: Precision mechanisms, office equipment, appliance drives, automation and low-noise motion components.
